Assembly Standard Bus - YASKAWA System 300S+ CPU 315-4PN43 Manual

+
System 300S

3.2 Assembly standard bus

General
Profile rail
Bus connector
HB140 | CPU | 315-4PN43 | en | 18-02
The single modules are directly installed on a profile rail and connected via the backplane
bus connector. Before installing the modules you have to clip the backplane bus con-
nector to the module from the backside. The backplane bus connector is delivered
together with the peripheral modules.
Order number A
390-1AB60 160
390-1AE80 482
390-1AF30 530
390-1AJ30 830
390-9BC00* 2000
*) Unit pack: 10 pieces
Measures in mm
For the communication between the modules the System 300S uses a backplane bus
connector. Backplane bus connectors are included in the delivering of the peripheral
modules and are clipped at the module from the backside before installing it to the profile
rail.
Assembly and installation guidelines
Assembly standard bus
B
140
466
500
800
Drillings only left
C
10
8.3
15
15
15
17