5.
Accessories
STS/CKD+, Handeld calibration keypad
For the use of the calibration keypad, refer to the specific manual.
ZMCAP/123, calibration cap adapter
ENGLISH
The calibration keypad enables the following:
•
Zero calibration;
•
Span calibration;
•
To reset the device;
•
To change or visualize only the Baud Rate;
•
To set the address of the RS485 bus;
•
To show the firmware version of the detector.
Stainless steel calibration adapter for all of Sensitron
gas detectors. It allows the right quantity of gas in-
let to flow to the detector. It comes complete with
adapters to fit on the detectors' heads.
Pag. 20