Mounting The Vertical Shift Plate - Barco ELM Series Installation Manual

Mounting the Vertical Shift Plate

What has to be To allow vertical shift adjustment of the filter, a plate with vertical slots has to be
done mounted on the horizontal shift lath. This plate is also the support plate for the filter.
Necessary Tools A flatblade screwdriver for M3 (No 5.5)
Mounting the To mount the shift plate, follow the next procedure:
shift plate
Illustrations
BARCO ——————————————————— 10
Step Action
1 Place the vertical shift plate (A) on the front side of the
horizontal shift lath, lining up the threaded studs with the
slots in the vertical shift plate.
2 Secure the position of the plate with the 2 screws (B). Don’t
tighten the screws too hard because a vertical adjustment
of the polarizer has still to be done.
A
Image 1
B
Image 2
B
A
————————————— Projection Systems
Image
1&2
1&2