Configuration Of Connectors And Terminal Blocks; Main Power Supply Connector Xa-1; Control Power Supply Connector Xa-2; Motor Connector Xb - Panasonic MINAS-A6 Series Specifications

7. Configuration of connectors and terminal blocks

7-1 Main Power Supply Connector XA-1

Servo driver side: J. S. T. Mfg S03B-F31SK-GGXR(LF)(AU)
Pin No.
1 P1 (+ Line)
2 N1 (- Line)
3

7-2 Control Power Supply Connector XA-2

Servo driver side: Molex 5569-02A2-210
Pin No.
1 P2 (+ Line)
2 N2 (- Line)
* There is no anti-connection function on the driver.
Reverse connection is caused of failure.
Enough attention to the power supply wiring.
N-pin of Main power supply connector XA-1 connect to control power supply connector XA-2.

7-3 Motor Connector XB

Servo driver side: J. S. T. Mfg S04B-F31SK-GGXR(LF)(AU)
Pin No.
1
2
3
4
R6.0
Symbol
• Input DC48 V or DC24 V.
• Use stabilized DC power source with reinforced insulation.
• Frame ground
FG
Symbol
• Input DC48 V or DC24 V.
• Use stabilized DC power source with reinforced insulation.
Symbol
U • Connect U phase of the motor winding
V • Connect V phase of the motor winding
W • Connect W phase of the motor winding
FG • Connect FG wire of the motor
Description
Description
Description
Motion Control Business Unit, Panasonic Industry Co., Ltd.
No. SX-DSV03167 - 9 -
Layout
Layout
2
1
Layout