Additional Precautions - Panasonic MINAS-A6 Series Specifications

14. Additional Precautions

(1) Precautions to be taken when exporting the product or equipment incorporating the product.
If the end user or end use of this product is related to the military or weaponry, etc., it may be subject to export
restrictions as set forth in the Foreign Exchange and Foreign Trade Act. When exporting, please review and
follow the necessary export procedures.
(2) This product designed for general industrial use. This product is not for use in devices critical to human
wellbeing or in specialized environments, such as nuclear power control, aerospace equipment, transportation
systems, medical equipment, various safety devices, or equipment that requires a high degree of cleanliness.
(3) Please ensure that finished equipment complies with standards, laws, and regulations, and confirm that the
structure, dimensions, life span, and characteristics of the product match those of your installed equipment and
components.
(4) Since it is possible, albeit unlikely, that your finished equipment will operate abnormally due to a malfunction of
our product (such as due to signal disconnections, signal open phases, or operation performed outside the settings
as a result of external noise or static electricity being applied), please put in place fail-safes and ensure adequate
safety within the operational range of your site.
(5) Make sure to follow indications as overloading products can cause loads to collapse.
(6) Ensure that the motor shaft is not operated without being electrically grounded, as this may lead to electrolytic
corrosion of the motor bearing and increased bearing noise, depending on the machine and the installation
environment.
(7) A tightening torque appropriate for the product mounting screws should be chosen to avoid loosening or damage,
taking into account the strength of the screws used and the material to which they are mounted.
(8) Because noise resistance may be affected by wiring conditions (e.g., grounding methods, cable length, signal wire
shielding), please confirm the noise resistance of your equipment.
(9) When discarding of the servo driver or motor, treat them as industrial waste.
(10) When disposing of batteries, insulate them with tape and dispose of them in accordance with local regulations.
(11) As long as you comply with this specifications document, certain components may be modified to improve
performance, etc.
(12) Changes to specifications shall be reflected in the delivery specifications document or in a document specified by
your company. If this affects the function or characteristics of the product, the specifications will be changed
following a test with a prototype.
(13) Changes in specifications may affect the price of the product.
(14) If you require clarification on something that is not covered by this specifications document, please contact us in
advance.
(15) In the event of a problem, the two parties shall resolve the issue following consultations as set forth in this
specifications document.
(16) Depending on the nature of the failure of the product, an amount of smoke equivalent to one cigarette may be
emitted. Please consider these possibilities when using the device in cleanrooms, etc.
(17) Do not use detergents containing benzine, thinner, alcohol, acid, or alkaline as this may cause discoloration or
damage to the product's exterior.
(18) Do not reverse engineer, decompile, or disassemble this product.
R6.0 Motion Control Business Unit, Panasonic Industry Co., Ltd.
No. SX-DSV03167 - 39 -