Page 2
• Please read the entire instruction manual before proceeding. • Ensure all components listed are present. • If you are missing any of the components, call customer support at 951-493-7185. • Ensure you have all necessary tools before proceeding. • Do not attempt to work on your vehicle when the engine is hot. •...
Page 4
REMOVAL Figure A Refer to Figure A for Steps 1-2 Step 1: Remove the intake housing of vehicle to access the backside of the headlight. Step 2: Slide your hand through the back side of the headlight and push the cap off on the center of the headlight.
Page 5
INSTALL Figure B Refer to Figure B for Step 3 Connect the inlet scoop to the aFe POWER housing. Step 3: Page 5...
Page 6
INSTALL Figure C Refer to Figure C for Step 4-5 Re-install housing into the vehicle and make sure the inlet scoop connects to the headlight hole. Step 4: Step 5: Install the other components for the intake per the intake system instruction sheet. Your installation is now completed.
Page 7
Warranty General Terms: • aFe warrants their products to be free from manufacturer’s defects due to workmanship and material. • This warranty applies only to the original purchaser of the product and is non-transferrable. • Proof of purchase of the aFe product is required for all warranty claims. •...
Page 8
252 Granite Street Corona, CA 92879 TEL: 951.493.7100 • TECH: 951.493.7185 E-Mail:Tech@aFepower.com P/N: 06-81269...
Need help?
Do you have a question about the 50-70009S and is the answer not in the manual?
Questions and answers