Pan/Tilt Screen - Panasonic AW-UE150KP Operating Instructions Manual

Camera menu items (continued)

Pan/Tilt screen

P a n / T i lt
I n s t a l l P osi tion
S m a r t P i c tur e Fl ip
F l i p D e t ect Ang le
P / T S p e e d Mo de
S p e e d W i t h Z oom Positi on
F o c u s A d j ust Wit h PTZ.
P o w e r O n Pos itio n
P r e s e t N umb er
R e t u r n
Install Position
[Desktop, Hanging]
[Desktop] or [Hanging] is selected here as the method used to install
the unit.
Desktop Stand-alone installation
Hanging Suspended installation
<NOTE>
• When [Hanging] has been selected, the top, bottom, left and right
of the images will be reversed, and up/down/left/right control for
panning and tilting will also be reversed.
Smart Picture Flip [Off, Auto]
When the tilt becomes the angle set for [Flip Detect Angle], the image
will be flipped in the vertical direction automatically.
Off The picture is not turned upside down.
Auto The picture is automatically turned upside down.
Flip Detect Angle [60deg to 120deg ]
Set the tilt angle at which the image will be flipped in the vertical
direction automatically when [Smart Picture Flip] is set to [Auto].
P/T Speed Mode [Normal(60deg/s), Fast(180deg/s),
Quick(60deg/s)]
Set the speed of pan/tilt operation.
Normal Pan/tilt operates at normal speed (maximum about 60° per
(60deg/s) second).
Fast Pan/tilt operates at fast speed (maximum about 180° per
(180deg/s) second).
Quick Pan/tilt operates at normal speed (maximum about 60° per
(60deg/s) second) and acceleration and deceleration (rise time and
fall time) are faster.
<NOTE>
• The pan/tilt operation noise may increase when [Fast(180deg/s)] is
selected.
• Even when [Fast(180deg/s)] is selected, the pan/tilt speed during
preset playback will be the same speed as when [Normal(60deg/s)]
is selected.
Speed With Zoom Position [Off, On]
[Off] or [On] is set here for the function used to adjust the pan-tilt
adjustment speed in conjunction with the zoom magnification.
When [On] is set, the panning and tilting operations will become
slower in the zoom status.
This function has no effect during preset operations.
De sktop
Off
90deg
Norm al(60d eg/s)
On
Off
None
001
Focus Adjust With PTZ. [Off, On]
[Off] or [On] is set here for the function which compensates for out-of-
focusing when it occurs during panning, tilting or zooming operations.
When [Off] is set, adjust the focus as required after zooming or set
[Focus Mode] to [Auto].
This is only enabled when [Manual] has been selected as the [Focus
Mode] setting.
Power On Position [None, Standby, Home, Preset]
Select the initial positions for Pan/Tilt/Zoom when the power is turned
on.
None Keep the positions of Pan/Tilt when the power was
last on, with Zoom being at the Wide end.
Standby Move to the Pan/Tilt/Zoom positions they were in the
last time the camera was switched to Standby mode.
Home Pan/Tilt move to their home positions (front) and
Zoom goes to the Wide end.
Preset Preset playback is performed at the preset position
specified with [Preset Number].
Preset Number [001 to 100]
Specify a number for preset playback when the power turns ON when
[Preset] is set in [Power On Position].
<NOTE>
• If an unregistered preset number is set, preset playback is not
performed and the operation is the same as [None].
Return
Return to the previous menu level.
71