Picture 7/8 Screen - Panasonic AW-UE150KP Operating Instructions Manual

Camera menu items (continued)
Black Gamma [–8 to +8]
Set the gamma curve for dark areas.
–8 to –1 Compresses dark parts.
1 to 8 Expands dark parts.
Black Gamma Range [1 to 3]
Set the maximum level of compression/expansion.
1 Around 20%
2 Around 30%
3 Around 40%
DRS [Off, Low, Mid, High]
Set the DRS function which performs correction when video with high
light/dark contrast is displayed.
You can select from a [Low], [Mid], or [High] effect level.
This is only enabled when [Gamma Mode] is set to other than [HLG].
Return
Return to the previous menu level.

Picture 7/8 screen

P i c t u r e 7 / 8
K n e e M o d e
A u t o K n e e R e s p o n s e
K n e e P o i n t
K n e e S l o p e
H L G K n e e
H L G K n e e P o i n t
H L G K n e e S l o p e
R e t u r n
Knee Mode [Off, Auto, Manual]
Set the operating mode for gradation compression (knee).
Off Turn the knee function off.
Auto Enable the knee function, and set the knee point and knee
slope automatically.
Manual Enable the knee function, and set the knee point and knee
slope manually.
This is only enabled when [Gamma Mode] is set to other than [HLG].
This cannot be set when the [Color Setting] is [V-Log].
All of the following Knee Mode items also cannot be set when [Color
Setting] is [V-Log].
Auto Knee Response [1 to 8]
Set the speed of the auto knee response.
The response speed increases the lower the setting value.
This is only enabled when [Gamma Mode] is set to other than [HLG].
Knee Point [70.0% to 107.0%]
Set the compression level (knee point) position for high-brightness
video signals.
This is only enabled when [Gamma Mode] is set to other than [HLG].
This is only enabled when [Knee Mode] is set to [Manual].
Knee Slope [0 to 99]
Set the knee slope.
This is only enabled when [Gamma Mode] is set to other than [HLG].
This is only enabled when [Knee Mode] is set to [Manual].
<NOTE>
• When [DRS] is enabled, the knee setting is disabled.
HLG Knee [Off, On]
Enable or disable the operation of the HLG knee.
This is only enabled when [Gamma Mode] is set to [HLG].
This cannot be set when the [Color Setting] is [V-Log].
All of the following HLG Knee items also cannot be set when [Color
Setting] is [V-Log].
HLG Knee Point [55% to 100%]
Set the position of the HLG knee point.
This is only enabled when [Gamma Mode] is set to [HLG].
HLG Knee Slope [0 to 100]
Set the slope of the HLG knee.
This is only enabled when [Gamma Mode] is set to [HLG].
Return
Return to the previous menu level.
53
A u t o
4
9 3 . 0 %
9 9
O f f
5 5 %
1 0