Table of Contents
Advertisement
Installation Instructions
Before installation (continued)
How to remove the pan stopper
1.
Hold both sides and pull outwards.
How to fit the pan stopper
1.
Match the notches in the panning section and the base section, then insert the point of the pan stopper until it clicks into
place.
<NOTE>
• Make sure you remove the lens cap and pan stopper when turning on the power.
If there is an error, turn the power on again after removing the lens cap and pan stopper.
10
Notch in the panning section
Notch in the base section
Pan stopper
Point of the pan stopper
Advertisement
Table of Contents
