Basic Setup Operations; When Performing The Operations Using The Wireless Remote Control - Panasonic AW-UE150KP Operating Instructions Manual

Basic setup operations

Camera menus are displayed on the monitor when the unit's settings are
to be selected.
The monitor is connected to the video signal output connector.
The basic camera menu operations involve displaying sub-menus from
the Top Menu items, and selecting settings on the sub-menus.
Some sub-menus have menu items for performing more detailed
settings.
The camera menu operations are conducted using the wireless remote
control.
Described below are the Basic setup operations for changing the
camera menu item settings using the wireless remote control.
Wireless remote control operations
„ „
Camera menu operation
Selecting a camera to Press the <CAM1>, <CAM2>, <CAM3>, or
operate <CAM4> button.
Press and hold the <MENU> button for about
Displaying the Top Menu
2 seconds.
Selecting items Press the <4>, <5>, <b>, or <a> button.
Displaying sub-menus Press the <M> button.
Returning to the previous Place the cursor on [Return], and press the
menu <M> button.
Place the cursor on the item you want to
change, and press the <M> button to make the
setting value blink.
Changing settings
Change the value using the <4>, <5>, <b>,
or <a> button, and press the <M> button to
confirm.
Canceling setting Press the <MENU> button (hold for less than
changes 2 seconds) while the setting value is blinking.
Exiting camera menu
Press and hold the <MENU> button for about
operations 2 seconds.
<NOTE>
• When AW-RP150 is connected, refer to the operating instructions for
the controller.
Wireless remote control
When performing the operations using the
wireless remote control
1. Press the <CAM1>, <CAM2>, <CAM3> or <CAM4> button
to select the unit which is to be operated.
2.
Press and hold the <MENU> button for about 2 seconds.
The Top Menu is displayed.
3.
Press the <4> or <5> button to bring the cursor to the
item to be selected.
Each time the <4> or <5> button is pressed, the cursor moves.
The cursor can be moved in the same way using the <b> or <a>
buttons.
4.
Press the <M> button.
The sub-menu of the selected item is displayed.
(Some sub-menu items have a sub-menu of their own.)
5.
Press the <4> or <5> button to bring the cursor to the
item to be set.
Each time the <4> or <5> button is pressed, the cursor moves.
The cursor can be moved in the same way using the <b> or <a>
button.
With the cursor at the [Return] position, press the <M> button to return
to the previous menu.
6. Press the <M> button.
The value of the item to be set starts blinking.
7.
Press the <4> or <5> button to change the setting.
The setting can be changed in the same way using the <b> or <a>
button.
8.
Press the <M> button.
The value of the item to be set is entered, and it stops blinking.
9.
After the setting has been completed, press the <MENU>
button for about 2 seconds.
The camera menu display is exited.
44