Pan/Tilt 1/2 Screen - Panasonic AW-UE100WP Operating Instructions Manual

Camera menu items (continued)

Pan/Tilt 1/2 screen

P a n / T i lt 1/2
I n s t a l l P osi tion
S m a r t P i c tur e Fl ip
F l i p D e t ect Ang le
P / T S p e e d Mo de
P / T A c c e l era tion Setti ng
S p e e d W i t h Z oom Positi on
F o c u s A d j ust Wit h PTZ.
P r i v a c y M ode
R e t u r n
Install Position
[Desktop, Hanging]
[Desktop] or [Hanging] is selected here as the method used to install
the unit.
Desktop Stand-alone installation
Hanging Suspended installation
<NOTE>
• When [Hanging] has been selected, the top, bottom, left and right
of the images will be reversed, and up/down/left/right control for
panning and tilting will also be reversed.
Smart Picture Flip [Off, Auto]
When the tilt becomes the angle set for [Flip Detect Angle], the image
will be flipped in the vertical direction automatically.
Off The picture is not turned upside down.
Auto The picture is automatically turned upside down.
Flip Detect Angle [60deg to 120deg ]
Set the tilt angle at which the image will be flipped in the vertical
direction automatically when [Smart Picture Flip] is set to [Auto].
P/T Speed Mode [Normal(60deg/s), Fast1(90deg/s),
Fast2(180deg/s)]
Set the speed of pan/tilt operation.
Normal(60deg/s) Pan/tilt operates at normal speed (maximum about
60° per second).
Fast1(90deg/s) Pan/tilt operates at fast speed1 (maximum about 90°
per second).
Fast2(180deg/s) Pan/tilt operates at fast speed2 (maximum about
180° per second).
P/T Acceleration Setting
Displays the advanced setting screen for setting the acceleration
speed while starting/stopping a pan/tilt operation. (→ page 74)
Speed With Zoom Position [Off, On]
[Off] or [On] is set here for the function used to adjust the pan-tilt
adjustment speed in conjunction with the zoom magnification.
When [On] is set, the panning and tilting operations will become
slower in the zoom status.
This function has no effect during preset operations.
De sktop
Off
90deg
Norm al(60d eg/s)
On
Off
Off
Focus Adjust With PTZ. [Off, On]
[Off] or [On] is set here for the function which compensates for out-of-
focusing when it occurs during panning, tilting or zooming operations.
When [Off] is set, adjust the focus as required after zooming or set
[Focus Mode] to [Auto].
This is only enabled when [Manual] has been selected as the [Focus
Mode] setting.
Privacy Mode [Off, On]
Sets Off/On the function for turning the camera direction down when
this unit is changed to Standby mode.
Off Does not change the camera direction when the camera
is switched to Standby mode. (The camera remains in the
direction it was when the power was turned On)
On Moves the camera direction downward (TILT: –90 degrees
position) when the camera is switched to Standby mode.
Moves the camera to the position specified in [Power On
Position] when the power is turned On again.
Return
Return to the previous menu level.
73