Table of Contents
Advertisement
Operating Instructions
Starting the Web Setting Screen
If you connect the unit with a PC, you can operate the unit and configure the unit's settings from the
web setting screen.
For details of the required personal computer environment
Starting the Web Setting Screen (Live Screen/Setup Screen)
Connect the unit with a PC.
Perform the settings for the PC:
-
Select an IP address for the personal computer within the private address range while ensuring
that it is different from the address of the unit.
-
Set the subnet mask for the personal computer to the same address as the unit.
If you need to change the IP address and subnet mask, be sure to ask your dealer to make these
changes for you.
The IP address and subnet mask of the unit (factory defaults)*
- IP address : 192.168.0.10
- Subnet mask : 255.255.255.0
* The factory default for the private address range is between 192.168.0.0 and 192.168.0.255.
1
Start the web browser and enter [http://the IP address for the unit/] into the
address bar.
If the IP address of the unit has been changed from the [192.168.0.10] set at the time of purchase,
enter the new IP address.
If the HTTP port number has been changed from the [80] set at the time of purchase, enter
[http://the IP address for the unit: The port number/].
Page 63
85
Advertisement
Table of Contents
