Picture 2/8 Screen; Picture 3/8 Screen - Panasonic AW-UE150KP Operating Instructions Manual

Camera menu items (continued)

Picture 2/8 screen

P i c t ure 2/8
C h r o m a L eve l
C h r o m a P has e
M a s t e r P ede stal
R P e d e s tal
G P e d e s tal
B P e d e s tal
P e d e s t a l O ffse t
R e t u r n
Chroma Level [Off, –99% to 99%]
Set here the color intensity (chroma level) of the images.
This cannot be set when the [Color Setting] is [V-Log].
Chroma Phase [–31 to +31]
Make fine adjustments to the hue of the colors in the images.
This cannot be set when the [Color Setting] is [V-Log].
Master Pedestal [–200 to +200]
This item is used to adjust the black level (adjust the pedestal).
These parts become darker when a negative setting is selected and,
conversely, lighter when a positive setting is selected.
This cannot be set when the [Color Setting] is [V-Log].
All of the following Master Pedestal items also cannot be set when
[Color Setting] is [V-Log].
R Pedestal [–100 to +100]
This enables the R pedestal to be adjusted.
G Pedestal [–100 to +100]
This enables the G pedestal to be adjusted.
B Pedestal [–100 to +100]
This enables the B pedestal to be adjusted.
Pedestal Offset [Off, On]
Set the pedestal level of the Rch, Gch, and Bch when the auto black
balance has been adjusted.
Off Set the pedestal level to [0] for [R Pedestal], [G Pedestal],
and [B Pedestal].
On Maintain the values set for each of [R Pedestal],
[G Pedestal], and [B Pedestal].
Return
Return to the previous menu level.

Picture 3/8 screen

0% D e t a i l
0
0
0
0
0
Off
R e t u r n
Detail [Off, On]
Turn on/off the contour (sharpness of images) adjustment of images.
This cannot be set when the [Color Setting] is [V-Log].
All of the following Detail items also cannot be set when [Color
Setting] is [V-Log].
Master Detail [–31 to +31]
Adjust the contour correction level (master).
This is only enabled when [Detail] is set to [On].
Detail Coring [0 to 60]
Set the level of the signal (including noise) which makes the detail
effect not work.
This is only enabled when [Detail] is set to [On].
V Detail Level [–7 to +7]
Adjust the contour correction level in the vertical direction.
This is only enabled when [Detail] is set to [On].
Detail Frequency [–7 to +7]
Set the boost frequency of detail.
–7: Low frequency
+7: High frequency
When a high frequency is selected, the detail effect is added to
subjects with more definition.
This is only enabled when [Detail] is set to [On].
Level Depend. [–7 to +7]
When the detail of bright signals are emphasized, the detail of dark
parts are compressed.
The larger the [Level Depend.] setting, the more detail of bright parts
is compressed.
This is only enabled when [Detail] is set to [On].
Knee Aperture Level [0 to 5]
Set the detail level of very bright parts.
This is only enabled when [Detail] is set to [On].
Detail Gain(+) [–31 to +31]
Set the detail level of the plus direction (direction to be made
brighter).
This is only enabled when [Detail] is set to [On].
Detail Gain(–) [–31 to +31]
Set the detail level of the minus direction (direction to be made
darker).
This is only enabled when [Detail] is set to [On].
Return
Return to the previous menu level.
50
P i c t u r e 3 / 8
M a s t e r D e t a i l
D e t a i l C o r i n g
V D e t a i l L e v e l
D e t a i l F r e q u e n c y
L e v e l D e p e n d .
K n e e A p e r t u r e L e v e l
D e t a i l G a i n ( + )
D e t a i l G a i n (—)
to
O n
0
1 5
0
0
0
2
0
0