Setting Status Screen [Setting Status] - Panasonic AW-UE150KP Operating Instructions Manual

Web screen configurations (continued)
4.
Collaboration capability [Linkage]
Tracking data output setting button [Tracking Data Output]
The tracking data output setting screen [Tracking Data Output] is
displayed when the button is clicked.
→ "Tracking data output settings screen [Tracking Data Output]"
(→ page 127)
P2 Cast connection setting button [P2 Cast]
P2 Cast connection setting screen [P2 Cast] is displayed when the
button is clicked.
→ "P2 Cast connection setting screen [P2 Cast]" (→ page 129)
5.
User management settings [User mng.]
User authentication button [User auth.]
The user authentication screen [User auth.] is displayed when the
button is clicked.
→ "User authentication screen [User auth.]" (→ page 130)
Host authentication button [Host auth.]
The host authentication screen [Host auth.] is displayed when the
button is clicked.
→ "Host authentication screen [Host auth.]" (→ page 131)
6. Network settings [Network]
Network setup button [Network]
The network setup screen [Network] is displayed when the button is
clicked.
→ "Network setup screen [Network]" (→ page 132)
Advanced network setting button [Advanced]
The advanced network setting screen [Advanced] is displayed when
the button is clicked.
→ "Advanced network setting screen [Advanced]" (→ page 135)
7.
Maintenance [Maintenance]
System log button [System log]
The system log screen [System log] is displayed when the button is
clicked.
→ "System log screen [System log]" (→ page 148)
Product information button [Product Info.]
The product information screen [Product info.] is displayed when the
button is clicked.
→ "Product information screen [Product info.]" (→ page 149)
Reset settings button [Default reset]
The reset settings screen [Default reset] is displayed when the button
is clicked.
→ "Reset settings screen [Default reset]" (→ page 150)
Back up button [Backup]
The back up screen [Backup] is displayed when the button is clicked.
→ "Back up screen [Backup]" (→ page 151)
8.
Power ON button [Power ON]/Standby button [Standby]
Turn the unit on.
[Power ON]
Set the unit to Standby mode.
[Standby]
When you enter Standby mode, the display will automatically switch
to the live screen [Live]. In addition, the [Setup] button in the live
screen [Live] will be disabled, and you cannot operate the web setup
screen [Setup].
9.
Main area
The menu screen is displayed.

Setting status screen [Setting status]

Model no.
The model number of the unit is displayed.
Firmware Version
The firmware version of the unit is displayed.
Refer to the product information screen [Product info.] for detailed
version information.
System Frequency
The frame frequency of the unit is displayed.
System Format
The video format of the unit is displayed.
Streaming mode
The streaming mode of the unit is displayed.
95