Panasonic AW-UE150KP Operating Instructions Manual page 120

Web screen configurations (continued)
DownCon Detail [Off, On]
Turn on/off the contour (sharpness of images) adjustment of images
down-converted from 4K to HD.
This is enabled when [Format] is the following.
• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,
2160/25p
This cannot be set when the [Color Setting] is [V-Log].
All of the following DownCon Detail items also cannot be set when
[Color Setting] is [V-Log].
Factory settings: On
DC. Master Detail [–31 to +31]
Adjust the contour correction level (master) for images down-
converted from 4K to HD.
This is enabled when [Format] is the following.
• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,
2160/25p
This is only enabled when [DownCon Detail] is set to [On].
Factory settings: –20
DC. Detail Coring [0 to 60]
Set the level of the signal (including noise) which makes the detail
effect not work for images down-converted from 4K to HD.
This is enabled when [Format] is the following.
• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,
2160/25p
This is only enabled when [DownCon Detail] is set to [On].
Factory settings: 15
DC. V Detail Level [–7 to +7]
Adjust the contour correction level in the vertical direction for images
down-converted from 4K to HD.
This is enabled when [Format] is the following.
• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,
2160/25p
This is only enabled when [DownCon Detail] is set to [On].
Factory settings: 7
DC. Detail Frequency [–2 to +2]
Set the boost frequency of detail for images down-converted from 4K
to HD.
–2: Low frequency
to
+2: High frequency
When a high frequency is selected, the detail effect is added to
subjects with more definition.
This is enabled when [Format] is the following.
• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,
2160/25p
This is only enabled when [DownCon Detail] is set to [On].
Factory settings: 0
DC. Level Depend. [–7 to +7]
The larger the setting for images down-converted from 4K to HD, the
more detail of bright parts is compressed.
This is enabled when [Format] is the following.
• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,
2160/25p
This is only enabled when [DownCon Detail] is set to [On].
Factory settings: 0
DC. Knee Aperture Level [0 to 5]
Set the detail level of very bright parts in images down-converted from
4K to HD.
This is enabled when [Format] is the following.
• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,
2160/25p
This is only enabled when [DownCon Detail] is set to [On].
Factory settings: 2
Gamma Mode
[HD, FILMLIKE1, FILMLIKE2, FILMLIKE3, FILM REC,
VIDEO REC, HLG]
Select the type of gamma curve.
HD HD (High Definition) video gamma characteristic.
FILMLIKE1 Characteristic capable of reproducing better gradation in
highlights than HD gamma.
FILMLIKE2 Characteristic capable of reproducing better gradation in
highlights than [FILMLIKE1].
FILMLIKE3 Characteristic capable of reproducing better gradation in
highlights than [FILMLIKE2].
FILM REC Cinema film gamma characteristic.
VIDEO REC Cinema video gamma characteristic.
HLG Hybrid Log Gamma characteristic.
This cannot be set when the [Color Setting] is [V-Log].
All of the following Gamma Mode items also cannot be set when
[Color Setting] is [V-Log].
Factory settings: HD
<NOTE>
• When [Gamma Mode] is changed from [HLG] to a mode other
than [HLG], or when changed to [HLG], IP video transmission is
temporarily stopped.
Gamma [0.30 to 0.75]
Adjust the gamma correction level.
Specifying smaller values results in a gentler gamma curve for the
slope of low-brightness areas and sharper contrast.
Specifying larger values results in an expanded gradient for dark
areas and produces brighter images. The gamma curve for low-
brightness areas will be steeper, and contrast will be softer.
This is only enabled when [Gamma Mode] is set to other than [HLG].
Factory settings: 0.45
F-REC Dynamic Level [200%, 300%, 400%, 500%, 600%]
Set the dynamic range.
This is only enabled when [Gamma Mode] is set to [FILM REC].
Factory settings: 500%
F-REC Black STR. Level [0% to 30%]
Set the black stretch.
This is only enabled when [Gamma Mode] is set to [FILM REC].
Factory settings: 0%
V-REC Knee Slope [150%, 200%, 250%, 300%, 350%, 400%, 450%,
500%]
Set the knee slope.
This is only enabled when [Gamma Mode] is set to [VIDEO REC].
Factory settings: 150%
V-REC Knee Point [30% to 107%]
Set the knee point.
This is only enabled when [Gamma Mode] is set to [VIDEO REC].
Factory settings: 30%
120