Id Card Copying - Xerox WorkCentre 6655i/X User Manual

Copying

ID Card Copying

This section includes:
• Copying an ID Card ....................................................................................................................................................... 124
• Selecting Color or Black and White Copies ........................................................................................................... 125
• Reducing or Enlarging the Image ............................................................................................................................ 125
• Selecting the Paper Tray ............................................................................................................................................. 126
• Specifying the Original Type ..................................................................................................................................... 126
• Lightening or Darkening ID Card Copies .............................................................................................................. 126
• Automatically Suppressing Background Variation ............................................................................................ 126
Copying an ID Card
You can copy both sides of an ID card or small document onto one side of paper. Each side is copied
using the same location on the document glass. The printer stores both sides and prints them side by
side on the paper.
To copy an ID card:
Press the Services Home button, then touch ID Card Copy.
1.
2. To enter the number of copies, use the keypad on the touch screen or the control panel.
For Common Features, touch Edit.
3.
a. Verify the output color, paper supply, and reduce/enlarge settings.
b. Change the settings as needed.
c. Touch OK.
4. For Front Side Features, touch Edit.
a. Verify the original type, lighten/darken, and background suppression settings for side 1.
b. Change the settings as needed.
c. Touch OK.
5. Lift the document cover.
6. Place the ID card, or a document smaller than half the selected paper supply size, in the upper left
corner of the document glass.
7. Press the green Start button, or touch Scan Front on the touch screen.
The document scans and the Scan Back button appears on the touch screen.
8. Lift the document cover.
9. Turn over the document and position it in the upper left corner of the document glass.
10. For Back Side Features, touch Edit.
a. Verify the original type, lighten/darken, and background suppression settings for side 2.
b. Change the settings as needed.
c. Touch OK.
11. Press the green Start button, or touch Scan Back on the touch screen.
12. Lift the document cover and remove the ID card or document.
®
124 Xerox WorkCentre
User Guide
®
6655/6655i Color Multifunction Printer