BWT AQA drink Ho.Re.Ca. General Instructions Manual page 3

CONFORMITÀ ALLE NORMATIVE DI RIFERIMENTO Dichiarazione di conformità CE
Le apparecchiature indicate nel presente manuale di installazione uso e manutenzione della serie BWT AQA DRINK Ho.Re.Ca.
(tutti i modelli) sono conformi alle prescrizioni generali di sicurezza previste dalla seguente legislazione:
D.M. 25/12 regolamento recante disposizioni tecniche concernenti apparecchiature per il trattamento di acque potabili.
D.M. 174 del 6 aprile 2004 concernente i materiali e gli oggetti che possono essere utilizzati negli impianti fissi di captazione,
trattamento, adduzione e distribuzione delle acque destinate al consumo umano.
Decreto Legislativo n°31/2001 "attuazione della direttiva 98/83/CE relativa alla qualità delle acque destinate al consumo
umano".
89/336/CEE, per il ravvicinamento delle legislazioni degli Stati membri relative alla compatibilità elettroma-gnetica.
73/23/CEE e risponde ai requisiti specifici delle norme UNI EN ISO 12100–1 :2005 e UNI EN ISO 12100–2: 2005.
Per l'equipaggiamento elettrico l'apparecchio è conforme alle Norme EN 60204–1 (1992), 44/5 (1993) CEI 64–8 (1993) EN 60335
ed EN 60335–2–24 (sicurezza degli impianti elettrici d'uso domestico e similare) e alle normative inerenti la compatibilità
elettromagnetica EN 50081–50082.
D.L. 151 del 22 luglio 2005 in materia di riduzione dell'uso di sostanze pericolose nelle apparecchiature elettriche ed elettroniche,
nonché lo smaltimento dei rifiuti.
BWT Italia Srl opera con Sistema Qualità certificato in ottemperanza a quanto prescritto dalla Normativa UNI EN ISO 9001:2008,
con Certificato n. 677 emesso dall'ente CERTIQUALITY
COMPLIANCE WITH REFERENCE STANDARDS – EC Declaration of Conformity
The equipment mentioned in this installation, use and maintenance manual of the BWT AQA DRINK Ho.Re.Ca. series (all models)
complies with the following general safety requirements (all models) comply with the general safety requirements of the
following legislation:
D.M. 25/12 regulation on technical provisions concerning equipment for the treatment of drinking water.
D.M. 174 of 6 April 2004 concerning materials and objects that can be used in fixed installations for the collection, treatment,
adduction and distribution of water intended for human consumption.
Legislative Decree n°31/2001 "implementation of Directive 98/83/EC on the quality of water intended for human consumption".
COMPLIANCE WITH REFERENCE STANDARDS – EC Declaration of Conformity
89/336/EEC, on the approximation of the laws of the Member States relating to electromagnetic compatibility.
73/23/EEC and complies with the specific requirements of the UNI EN ISO 12100–1: 2005 and UNI EN ISO 12100–2:
The equipment mentioned in this installation, use and maintenance manual of the BWT
2005 standards.
AQA DRINK Ho.Re.Ca. series (all models) complies with the following general safety
As far as the electrical equipment is concerned, the appliance conforms to EN 60204–1 (1992), 44/5 (1993) CEI
requirements (all models) comply with the general safety requirements of the
64–8 (1993) EN 60335 and EN 60335–2–24 (safety of household and similar electrical installations) and to the
following legislation:
standards concerning electromagnetic compatibility EN 50081–50082.
D.M. 25/12 regulation on technical provisions concerning equipment for the treatment of
D.L. 151 of 22 July 2005 on the reduction of the use of hazardous substances in electrical and electronic equipment,
drinking water.
as well as the disposal of waste.
D.M. 174 of 6 April 2004 concerning materials and objects that can be used in fixed
BWT Italia S.r.l. operates with a certified Quality System in accordance with the requirements of UNI EN
installations for the collection, treatment, adduction and distribution of water intended
ISO 9001:2008, with Certificate No. 677 issued by the CERTIQUALITY body.
for human consumption.
Legislative Decree n°31/2001 "implementation of Directive 98/83/EC on the quality of
water intended for human consumption".
GENERALITA'
89/336/EEC, on the approximation of the laws of the Member States relating to
Gentile Cliente,
electromagnetic compatibility.
73/23/EEC and complies with the specific requirements of the UNI EN ISO 12100–1: 2005
and UNI EN ISO 12100–2: 2005 standards.
As far as the electrical equipment is concerned, the appliance conforms to EN 60204–1
Ti ringraziamo per aver scelto un prodotto a marchio BWT.
(1992), 44/5 (1993) CEI 64–8 (1993) EN 60335 and EN 60335–2–24 (safety of household
L'apparecchio da te acquistato è stato studiato e costruito in Italia da personale altamente qualificato.
and similar electrical installations) and to the standards concerning electromagnetic
La costruzione evidenzia gli elevati standard di qualità che hanno da sempre contraddistinto le nostre
compatibility EN 50081–50082.
apparecchiature.
D.L. 151 of 22 July 2005 on the reduction of the use of hazardous substances in electrical
L'apparecchio non presenta pericoli per l'utilizzatore se usato secondo le istruzioni fornite dal costruttore.
and electronic
L'utilizzatore dovrà consultarle e attenersi alle istruzioni fornite sullo stesso.
equipment, as well as the disposal of waste.
Prima di intraprendere qualunque operazione sull'apparecchio, è indispensabile leggere attentamente
BWT Italia S.r.l. operates with a certified Quality System in accordance with the
questo manuale prestando particolare attenzione alle "AVVERTENZE DI SICUREZZA".
requirements of UNI EN ISO 9001:2008, with Certificate No. 677 issued by the
Conservare il manuale in prossimità dell'apparecchio, in luogo asciutto e protetto da agenti atmosferici.
CERTIQUALITY body.
Il manuale deve essere conservato fino allo smantellamento finale dell'apparecchio e, in caso di cambio
del proprietario, andrà consegnato al nuovo proprietario.
GENERALITY GENERALITY
Dear Customer,
Thank you for choosing a BWT branded product.
Thank you for choosing a BWT branded product.
The equipment you have purchased has been designed and manufactured in Italy by highly qualified
The equipment you have purchased has been designed and manufactured in Italy by
personnel. The construction reflects the high quality standards that have always been the hallmark of our
highly qualified personnel. The construction reflects the high quality standards that have
equipment.
always been the hallmark of ourequipment.
The device does not present any danger to the user if used according to the The device does not present any danger to the user if used according to the manufacturer's instructions.
The user must consult them and follow the instructions provided on the appliance.
manufacturer's instructions.
The user must consult them and follow the instructions provided on the appliance. Before carrying out any operation on the appliance, it is essential to read this manual carefully, paying
Before carrying out any operation on the appliance, it is essential to read this manual particular attention to the "SAFETY WARNINGS".
carefully, paying particular attention to the "SAFETY WARNINGS".
Keep the manual near the appliance, in a dry place and protected from atmospheric agents.
Keep the manual near the appliance, in a dry place and protected from atmospheric
The manual must be kept until the final dismantling of the appliance and, in the event of a change of owner,
agents.
must be handed over to the new owner.
The manual must be kept until the final dismantling of the appliance and, in the event of
a change of owner, must be handed over to the new owner.
3
3