Advertisement
OPERATING YOUR HEATER
Note: Your touchpad's default settings are compatible with your heater. No changes
are necessary.
Immediate Start
Turn your breaker on. If everything is connected correctly, the buttons at the bottom of the
screen should illuminate. The bottom left button is the main power unit - press it, and you
should hear a loud "clunk" from the power unit, which is the contactors engaging. If you do
nothing, it will begin heating immediately; the display will show the current temperature in the
sauna, as well as the time remaining on the heat cycle.
Delayed Start
Turn the power button on the touchpad. Press "menu" until the clock icon is flashing. Adjust the
preset time by pressing + or - until you get to the desired preset time. You are able to preset your
heater in 10 minute increments for up to 12 hours. The time remaining before your heater begins
heating should appear below the brackets at the top of the touchpad.
Setting the Temperature
The temperature displayed on the screen is the temperature inside the sauna where the temperature sensor is mounted. To set
your desired sauna temperature, press the power button on the touchpad. Press "menu" until the thermometer icon flashes.
Adjust the temperature with the + or - until your desired temperature is displayed. The sauna will heat to and hover around this
temperature.
GENERAL OPERATION INFORMATION
• Your Digital KIP heater is UL certified. Because of this, it is required to shut off after one hour of use. If you wish to continue
your sauna session, you will have to restart the heater if the heating period times out.
• If your heater isn't heating, turn off your breaker and try pressing the reset button under the heater as the high-limit safety
circuit may have been tripped. If this continues to happen, your sensor may be too high or too close to the heater.
• This is a traditional sauna heater with sauna stones. As such, you may pour water onto the stones according to your
humidity level preference. Please note, however, it often only takes a ladle-full to achieve the desired effect.
If there is an error code displayed on the touchpad, please refer to the error code list found in the manufacturer's manual
KIPW Heater Installation & Owner's Manual
almostheaven.com
12-2022
Advertisement
