Advertisement
POSITIONING THE HEATER COMPONENTS
Indoor Saunas
For indoor sauna applications, mount the power unit on or near the sauna. It can be mounted on the exterior of the sauna, or on
an adjacent wall. The main power for your heater will connect here first, and then relay onto your heater. Next, consider where
you'd like to mount your touchpad. You can mount the touchpad wherever it's most convenient for you. We do not recommend
mounting the touchpad in the sauna itself.
Outdoor Saunas
Neither of these components are waterproof, so proper precautions should be taken for outdoor sauna applications. Please
consider the following:
Power Unit
• The power unit should be mounted in a dry location. If it cannot be mounted in a dry
location, then it should be mounted in a ventilated weatherproof enclosure.
• Please note that the temperature sensor that comes with the sauna kit has a 15' reach - the
sensor is mounted in the sauna and connects to the power unit. If the sauna is located
greater than this distance away from where the power unit is installed, then the power
unit should be mounted nearer to the sauna in a weatherproof enclosure with proper
ventilation. The image on the right is an example of an enclosure. Alternatively, you can
purchase a longer temperature sensor wire directly from Almost Heaven Saunas.
Touchpad
• The touchpad should be mounted indoors in a dry area.
• The touchpad connects to the power unit with the provided 20' data cable. If you need a longer data cable for your
application, you may purchase one directly from Almost Heaven Saunas.
KIPW HEATER INSTALLATION MANUAL
|
PAGE 5
Advertisement
