Changing the Filter Paper (if Empty)
Access Service mode:
1
1. Open the door.
2. Press on the SW1 button (white) on the main board, then
close the door.
Open the brewer door, remove the protection
2
panel and remove the empty filter paper roll.
Tap "OK" on the installation popup
4
window.
Choose "Yes" to the question "Did
you replace the filter paper roll with a
new full roll?"
Exit Service mode.
Tap "Filter Paper Install".
Install the new roll. Feed the
3
paper under the left guide
bracket of the brew group,
under the brew chamber and
under the wheel guides by
gently lifting them using the
yoke. Then close the door.
10
Need help?
Do you have a question about the Encore Venti and is the answer not in the manual?
Questions and answers