Manchester vinyl picket gate with posts (12 pages)
Summary of Contents for Zippity ZP19072
Page 1
ASSEMBLY INSTRUCTIONS WOODTEK VINYL ASSEMBLY SLATTED PORTABLE PUPPY INSTRUCTIONS FENCE KIT 2-PACK ZP19072 (CEDAR COLOR) (44” W X 223/8” H) ZP19073 (CHARCOAL COLOR) 45 MIN Approximate assembly time for 2 fence panels Want to see a video on how to...
Page 2
ZP19072/ZP19073 ASSEMBLY INSTRUCTIONS GENERAL IMPORTANT INFORMATION Check the inside of the larger pieces in your box for other materials packed inside. When assembling components, place on a non-abrasive surface (i.e. shipping box) to avoid scratching. We recommend an area approximately 5’x 8’ for unobstructed assembling.
Page 3
ZP19072/ZP19073 ASSEMBLY INSTRUCTIONS 33.06 in 12.08 in 44.13 in 0.71 in 22.36 in 1.25 in 1.00 in WWW.ZIPPITY-OUTDOOR.COM...
ZP19072/ZP19073 ASSEMBLY INSTRUCTIONS INSPECT PARTS STEP 1: STEP 1.1 Check the inside of the larger pieces in your box for other materials packed inside. WWW.ZIPPITY-OUTDOOR.COM...
Page 5
ZP19072/ZP19073 ASSEMBLY INSTRUCTIONS LAY OUT MATERIALS STEP 2: Rail End Cap (8) Portable Feet (4) Silicone No-Scratch Connector Pin (4) ⅞" x 1½" x 12" Pad (8) (4 Installed, 4 Loose) Locking Pin (4) Top Rail (2) 1½" x 1½" x 44"...
Page 6
ZP19072/ZP19073 ASSEMBLY INSTRUCTIONS ASSEMBLE FIRST PANEL STEP 3: STEP 3.1 Slide (9) Slats into the routed holes of the Center Support until the center support sits in the middle of the slats. STEP 3.2 Slide the slats into the routed holes in one of the Posts (F).
Page 7
ZP19072/ZP19073 ASSEMBLY INSTRUCTIONS STEP 3.3 Identify the Top Rail and the Bottom Rail as shown below. Insert two loose Rail End Caps (A). Make sure they are oriented as illustrated. Note: The top rail will have no cut hole here.
Page 8
ZP19072/ZP19073 ASSEMBLY INSTRUCTIONS STEP 3.5 Slide the bottom rail over the bottoms of the posts until the pre-drilled holes in the (2) posts and the bottom rail align. Ensure the middle post inserts into the hole in the bottom rail.
ZP19072/ZP19073 ASSEMBLY INSTRUCTIONS ATTACH THE FEET STEP 4: STEP 4.1 Identify the Portable Feet (B). Set aside (4) of the Silicone No-Scratch Pads (C). Remove the adhesive cover from the pads and stick two pads on the far ends of the underside of each foot as shown below.
Page 10
ZP19072/ZP19073 ASSEMBLY INSTRUCTIONS ASSEMBLE SECOND FENCE PANEL STEP 5: STEP 5.1 Repeat steps 3-4 to assemble the second fence panel. CONNECT THE PANELS STEP 6: STEP 6.1 Connect the two fence panels using the Connector Pins as shown below. In-Line Application:...
Page 11
ZP19072/ZP19073 ASSEMBLY INSTRUCTIONS STEP 6.2 Connect the two fence panels using the Connector Pins as shown below. Corner/Angled Application: STEP 6.3 Secure the connector pins with the Locking Pin (J). WWW.ZIPPITY-OUTDOOR.COM...
Need help?
Do you have a question about the ZP19072 and is the answer not in the manual?
Questions and answers