Advertisement
Step 7
You will need
4 x Caps
(H12)
Attach 4 x Caps (H12) to Feet (P8x4) by pressing firmly into place.Ensure they are
secured well.
Step 8
You will need
34 x Nails
2 x Screws
Phillips head
Hammer
screwdriver
Align Back Panel (P6) with the edges of the partially assembled unit and the pre-drilled
holes with the back of the fixed shelf.Attach Back Panel (P6) to the back of Fixed Shelf (P5)
with 2 x Screws (H17) by tightening with the Phillips Head Screwdriver.Attach Back Panel (P6)
to Left,Right,Top&Bottom Panels (P1,P2,P3&P4) with 34 x Nails (H9) with the Hammer.Ensure
the nails are evenly spaced out as shown and are placed approximately 5mm from the edge of
the back panel.
fantasticfurniture.com.au
(H17)
(P8)
(H12)
(P8)
(H12)
(H17)
(P8)
(H12)
(P8)
(H12)
Page 9
Advertisement
