Appendix B: Design Specifications; Mechanical Specifications; Iridium Rf Specifications; Gps Specifications - NAL RESEARCH CORPORATION QUICKSILVER QS-100 User Manual

9 A B: D
PPENDIX
9.1 M
ECHANICAL
Dimensions:....................................................8.4" (21.34 cm) x 2.5" (6.86 cm) x 1.5" (3.81 cm)
Weight: ...........................................................26.2 oz (0.74 kg)
Enclosure: .......................................................Aluminum (black anodized)
Data/Power Connector: .................................DB-25 (custom pinout)
RF Connectors: ...............................................TNC female (Iridium), SMA female (GPS), RP-SMA
Status LEDs: ....................................................Power, Iridium, Wi-Fi, GPS, Status
Environmental Rating ....................................IP67, Natural Convection Cooling
9.2 I RF S
RIDIUM
Operating Frequency: ....................................1616.0 to 1626.5 MHz
Duplexing Method: ........................................TDD
Multiplexing Method: ....................................TDMA/FDMA
RF TX output power (average): ......................4.8 W
9.3 GPS S
PECIFICATIONS
Type of GPS Receiver: ....................................u-blox MAX-8MQ
Receiver Type: ................................................72-Channel GPS L1 C/A, SBAS, QZSS, GLONASS
Update Rate: ..................................................4 Hz
Accuracy: ........................................................Position: 8.2 feet (2.5 meters) CEP
Acquisition (typical): ......................................Hot starts: 1 second
Sensitivity: ......................................................Tracking: –166 dBm
Document Number: 451-19004-001C
S
ESIGN PECIFICATIONS
S
PECIFICATIONS
(see Appendix H: Mechanical Drawings)
female (Wi-Fi)
PECIFICATIONS
Position SBAS: 6.6 feet (2.0 meters) CEP
Aided starts: 2 seconds
Cold starts: 29 seconds
Reacquisition: –160 dBm
Cold starts: –148 dBm
Quicksilver QS-100 User Guide – Revision C
59 of 74