Dhcp; Dns; Dns Servers - NAL RESEARCH CORPORATION QUICKSILVER QS-100 User Manual

 Broadcast SSID — Determines whether or not the user's Wi-Fi network is publicly
visible.
 Security Mode — Configures the type of security on the user's network. Available
options are: None, WPA2.
 WPA2 Password — Configures the WPA2 password. 8-25 characters.
 Wi-Fi Channel – Configures the channel on which the network is broadcasted.
5.5.2

DHCP

See section 5.4.2 on page 37.
5.6

DNS

5.6.1 DNS S
ERVERS
On the DNS page, users can specify the primary and secondary address of the DNS servers
which they would like clients to use. Note that these will be sent directly to the client.
Addresses must be valid IPv4.
NOTE: Clients may choose to ignore these DNS addresses and use their own
settings. In any case, for DNS to work the DNS server addresses need to be
allowed through the outgoing firewall, by adding a rule in the Outgoing Firewall
section.
Document Number: 451-19004-001C
Quicksilver QS-100 User Guide – Revision C
40 of 74