Table of Contents
Advertisement
3.2
C
ONNECT WITH
Follow the steps below to use the website via an Ethernet cable.
1. Insert a Certus SIM card into the SIM slot before turning on the Quicksilver.
2. Install the Data Adapter on the Quicksilver DB-25 connector.
3. Connect the local device to the Quicksilver Data Adapter Ethernet port.
4. Verify the local device is set to obtain an IP address automatically through DHCP.
5. Turn on the Quicksilver and wait for the power light to stop blinking.
6. Open a web browser and enter the URL
website on the local device.
7. Sign in to the website with the default username "admin" and default password
"Password!" when prompted.
3.3
V
C
ERIFY
ONNECTION
The main menu on the left side of the Quicksilver website provides access
to the Device, Configuration, and Admin features.
1. Configure the outgoing firewall.
NOTE: Refer to Appendix G: Common Firewall Settings with regard
to common setups for the outgoing firewall, especially the need to
allow the DNS server through the firewall
2. Go to the Configuration >
Document Number: 451-19004-001C
E
C
THERNET
ABLE
https://192.168.20.1
Quicksilver QS-100 User Guide – Revision C
to load the Quicksilver
Figure 6: Main
Menu
19 of 74
Advertisement
Table of Contents
