Table of Contents
Advertisement
5.3
I
RIDIUM
The Iridium page displays the current Iridium mode setting and allows changing the mode
setting.
5.3.1
M
ODE
There are two Iridium modes: Inactive and Data. When Data mode is selected the Quicksilver
registers on the network and acquires provisioning information. The Status menu page auto-
updates the Iridium constellation information and the SIM information. The device then makes
a PPP connection in order to provide data services. If signal strength is low, it may take some
time before the PPP connection can be made.
NOTE: Internet connectivity will not work even while in data mode if the signal
strength is not good.
Document Number: 451-19004-001C
Figure 27: Iridium Page
Quicksilver QS-100 User Guide – Revision C
36 of 74
Advertisement
Table of Contents
