Table of Contents
Advertisement
3. Iridium page and select the Data option to activate the Quicksilver data connection.
4. Go to the Status page to verify the Iridium signal is detected and signal strength is
displayed.
5. Enter a desired web page such as
desired web page is displayed.
3.3.1
S
F
END A
ILE TO A
Once the Quicksilver has established a data connection, use a file transfer application such as
FileZilla to connect to a desired server and transfer files.
3.3.2
S
P
END A
ING
After establishing a data connection, ping a remote server to verify connectivity.
1. Open the Windows Command Prompt by typing "cmd" in the Windows taskbar search
box.
2. Enter "ping" followed by the IP address or domain name of the server.
3. Press Enter.
4. Verify that ping responses are received.
Document Number: 451-19004-001C
www.google.com
S
ERVER
Quicksilver QS-100 User Guide – Revision C
into the browser and verify the
20 of 74
Advertisement
Table of Contents
