Device Menu; Status; Notifications; Figure 7: User Data Backup Notifications Area Of Status Page - NAL RESEARCH CORPORATION QUICKSILVER QS-100 User Manual

4 D M
EVICE ENU
The Device menu features include the Status, Security (Admin Only), Users (Admin Only), Self-
Test (Admin Only), Firmware (Admin Only), Power (Admin Only) and About pages.
4.1 S
TATUS
The Status page is updated every 30 seconds after it is loaded or at reload.
4.1.1 N
OTIFICATIONS
 User Data Backup — When there is an archived user data backup from a previous
failure, the User Data Backup notification appears with options to download or delete
the user data backup. An encrypted backup of the user data is made when it is cleared
during a recovery process. If clearing the user data successfully recovers the device,
then the user data backup should be downloaded and sent to NAL along with other
details (refer to the About page). Otherwise, the user data may be deleted. The User
Data Backup is only meant to be used by NAL to diagnose failures. It is not meant to be
used to restore settings. Use the options to export/import users and download/load
configurations in order to restore settings.

Figure 7: User Data Backup Notifications Area of Status Page

 Startup Error — When there are any errors that result in a failure of the startup
configuration, the device will record the error as a notification and reboot into safe
mode. Rebooting may fix the issue. If the device continues to operate in safe mode and
Document Number: 451-19004-001C
Quicksilver QS-100 User Guide – Revision C
21 of 74