Appendix A: Recovery Mode - NAL RESEARCH CORPORATION QUICKSILVER QS-100 User Manual

Quicksilver QS-100 User Guide – Revision C
8 A A: R M
PPENDIX ECOVERY ODE
Certain failures (example: partial update) will cause the Quicksilver to enter into the Recovery
mode. In the Recovery mode, firmware updates can be applied, user data can be cleared, the
update log can be read, and the device can be rebooted over TCP with the help of a command
line program. Contact NAL for help.
NOTE: The Configuration website is not available.
Document Number: 451-19004-001C 58 of 74