Startup; Gps; Keep On; Figure 26: Gps Page - NAL RESEARCH CORPORATION QUICKSILVER QS-100 User Manual

5.1.2 S
TARTUP
 Load File — Loads the startup configuration with settings from an uploaded file. This file
should match the format of the configuration retrieved from the Download options.
 Restore Defaults — Reverts the startup configuration to the default settings.
 Copy Runtime — Copies the device's current configuration settings to the startup
configuration. Users should do this before restarting if they want to keep their changes.
5.2

GPS

5.2.1 K O
EEP N
The Keep On switch sets the GPS Keep On setting. If set to Yes, the GPS is on continuously.
Otherwise, the GPS will be kept off and only turn on when needed internally, such as when
synchronizing the system time from the GPS time.
NOTE: The GPS position information on the Status page will only auto-update
while the GPS is on.
Document Number: 451-19004-001C
Quicksilver QS-100 User Guide – Revision C

Figure 26: GPS Page

34 of 74