Wi-Fi; General; Figure 30: Wi-Fi Page - NAL RESEARCH CORPORATION QUICKSILVER QS-100 User Manual

5.5 W -F
I I
The Wi-Fi page displays the current interface and DHCP configuration on the Wi-Fi network.
5.5.1 G
ENERAL
 Enabled — Activates the Wi-Fi link.
 IP Address — Configures the default gateway of the network. It must be a valid IPv4
address. It must not belong to the same network defined in the Ethernet menu. The
configuration website can also be accessed at this address.
CAUTION: If the user changes the address for accessing the configuration website, the
connection will be dropped and a new connection must be made to the new address.
 Subnet Mask — Configures the netmask. Must be a valid IPv4 netmask.
 SSID — Configures the name of the Wi-Fi network. Max 30 characters.
Document Number: 451-19004-001C

Figure 30: Wi-Fi Page

Quicksilver QS-100 User Guide – Revision C
39 of 74