Safety instructions | Control panels CP1 and CP2 |
2�7 Personal protective equipment
The personal protective equipment is the responsibility of the user of the product.
Observe the safety regulations in your country.
All pieces of personal protective equipment should be intact.
2�8 Use in safety-related functions
▶ The customer is responsible for the preparation of a risk analysis of the tractor
and for the definition of possible safety functions of the tractor.
▶ The customer is responsible for evaluating the entire safety-relevant system and
for determining the suitability of CP1/CP2 for safety functions of the tractor.
▶ The machine control must monitor the CAN messages and respond to the fault
messages and loss of messages by bringing the machine into a safe state.
▶ An efficient field monitoring process must be defined by the customer.
All field failures with involvement of the CP1/CP2 should be reported to
Bosch Rexroth without delay, even if they are not subject to warranty.
RE 95259-01-B/2021-11-09, Bosch Rexroth AG
11/24