Client Utility Procedures; Opening A Client Utility; Exiting A Client Utility; Determining The Version Of A Client Utility - Cisco Aironet 340 Series Installation And Configuration Manual

Client Utility Procedures

Client Utility Procedures
This section provides instructions for the following procedures:
•
•
•
•

Opening a Client Utility

To open any of the client utilities on your Windows CE device, select Start > Programs > Cisco and the
utility you wish to open. The screen for that utility appears.

Exiting a Client Utility

To exit any of the client utilities, click OK at the bottom of the screen.

Determining the Version of a Client Utility

To determine which version of a utility you are running, open the utility and click the About button at
the bottom of the screen. For example, if you click the About button on the ACU screen, the About
screen appears (see
Figure 7-5

Deleting Client Utility Icons on HPC Devices

Icons for ACU and CEM are automatically added to the desktop of HPC devices when you install the
client utilities. If you wish to remove these icons from your desktop, hold down the Alt key and tap the
icon, click Delete, and click Yes to confirm your decision.
You can also use File Explorer to browse to the desktop, select the icon, and delete it.
Note
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
7-12
Opening a client utility
Exiting a client utility
Determining the version of a client utility
Deleting client utility icons on HPC devices
Figure 7-5). Click OK to return to the utility's main screen.
About Screen
Chapter 7 Routine Procedures
OL-1375-02