Cisco Aironet 340 Series Installation And Configuration Manual page 74

Upgrading the Client Adapter Software
Step 4 Use the laptop or PC's web browser to access the following URL:
http://www.cisco.com/public/sw-center/sw-wireless.shtml
Step 5 Locate the section for client adapter drivers and utilities.
Step 6 Click the link for Windows CE 2.11 or 3.0, depending on which version of Windows CE your device is
running.
Step 7 Select the WinCE2.11-PCM-LMC-vx.xx.exe or WinCE3.0-PCM-LMC-vx.xx.exe file.
Read and accept the terms and conditions of the Software License Agreement.
Step 8
Select the WinCE2.11-PCM-LMC-vx.xx.exe or WinCE3.0-PCM-LMC-vx.xx.exe file to download it.
Step 9
Save the file to a floppy disk or to the hard drive of your laptop or PC.
Step 10
Use Windows Explorer to locate the saved file.
Step 11
Step 12 Double-click the *.exe file for your version of Windows CE (WinCE2.11-PCM-LMC-vx.xx.exe or
WinCE3.0-PCM-LMC-vx.xx.exe). The application creates an Install directory under the ActiveSync
directory, extracts the .cab files contained in the *.exe file, and copies them to the Install directory.
Click Next to start the Windows CE Application Manager (CeAppMgr). CeAppMgr interrogates the
Step 13
Windows CE device to determine its processor type.
Note
Step 14 When a dialog box appears asking if you want to install the client adapter using the default application
installation directory, click Yes. The default directory is \Windows\Programs\Cisco on HPC devices and
\Windows\Start Menu\Programs\Cisco on PPC devices.
Note
A message and a progress bar appear indicating that the client adapter is being installed. CeAppMgr
copies the processor-specific *.cab file to the Windows CE device. Then the driver and help files are
copied to the \Windows directory, and the client utilities are installed in the \Windows\Programs\Cisco
directory on HPC devices or the \Windows\Start Menu\Programs\Cisco directory on PPC devices.
Shortcuts to ACU and CEM are automatically added to the desktop on HPC devices.
Step 15 When the installation process is complete on the laptop or PC, a message appears asking you to check
the screen of the Windows CE device to see if any additional steps are required to complete the
installation. Click OK to terminate the installation process on the laptop or PC.
Complete any required steps on the Windows CE device.
Step 16
Step 17 Disconnect the Windows CE device.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
7-8
If a Windows CE device is not connected to the laptop or PC (as instructed in
Exit to quit the setup program and connect a Windows CE device or click Next to continue
the installation. If you select Next, a message appears indicating that the software will be
downloaded the next time a mobile device is connected. Click OK. The next time a Windows
CE device is connected to the laptop or PC via ActiveSync, CeAppMgr starts automatically
and you are prompted to install the software. If you select Exit, click OK to shut down
CeAppMgr and start again beginning with
If you click No on an HPC device, CeAppMgr transfers the *.cab file to the Windows CE
device and executes it. This process takes awhile and shows no evidence of activity.
Eventually a screen appears on the Windows CE device that asks you where the application
files should be installed.
Chapter 7
Step 1.
Routine Procedures
Step 2), click
OL-1375-02