Cisco Aironet 340 Series Installation And Configuration Manual page 76

Upgrading the Client Adapter Software
Step 21 Select SSID under Property. Then enter your RF network's case-sensitive SSID in the Value box.
SSID
Select Client Name under Property. Then enter your Windows CE device's unique client name in the
Step 22
Value box.
Client Name
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
7-10
The service set identifier (SSID) identifies the specific wireless
network that you want to access.
Range: Up to 32 characters (case sensitive)
If you leave this parameter blank, your client adapter can
Note
associate to any access point on the network that is
configured to allow broadcast SSIDs (see the AP Radio
Hardware page in the access point management system). If
the access point with which the client adapter is to
communicate is not configured to allow broadcast SSIDs,
the value of this parameter must match the SSID of the
access point. Otherwise, the client adapter cannot access the
network.
A logical name for your Windows CE device. It allows an administrator
to determine which devices are connected to the access point without
having to memorize every MAC address. This name is included in the
access point's list of connected devices.
Range: Up to 16 characters
Note Each computer on the network should have a unique client
name.
Chapter 7 Routine Procedures
OL-1375-02