Cisco Aironet 340 Series Installation And Configuration Manual page 86

Error Messages
Error Message Password Not Changed - Cancelled By User
Explanation
Recommended Action
Error Message Please enter the correct password!
Explanation
Recommended Action
password is entered incorrectly three times in a row, the utility terminates.
Error Message Please enter a valid existing password!
Explanation
Recommended Action
Error Message WEP Key x must be 10 Hex digits!
Explanation
indicated. 40-bit keys must have 10 characters.
Recommended Action
invalid key.
Error Message WEP Key x must be 26 Hex digits!
Explanation
indicated. 128-bit keys must have 26 characters.
Recommended Action
invalid key.
Error Message Windows CE Services not found on this computer. Setup cannot continue
and will now exit.
Explanation
This directory and the files it contains are needed to copy the client adapter's driver and client utility
files from the laptop or PC to a Windows CE device.
Recommended Action
Then install Windows CE Services on the laptop or PC and start the driver installation procedure
again.
Note
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
8-6
CEM's Change Password screen was exited, but the existing password was not changed.
Click OK to acknowledge the message and return to the CEM screen.
The password required to access CEM was entered incorrectly.
Click OK to acknowledge the message; then re-enter the password. If the
In CEM's Change Password screen, the existing password was entered incorrectly.
Click OK to acknowledge the message; then re-enter the existing password.
An invalid number of characters or an incorrect character was entered for the WEP key
Click OK to acknowledge the message; then re-enter the characters for the
An invalid number of characters or an incorrect character was entered for the WEP key
Click OK to acknowledge the message; then re-enter the characters for the
The driver installation utility cannot locate the ActiveSync directory on the laptop or PC.
Click OK to acknowledge the message and terminate the installation utility.
Windows CE Services can be obtained from the CD that shipped with your Windows CE
device or from the device manufacturer.
Chapter 8 Troubleshooting
OL-1375-02