Cisco Aironet 340 Series Installation And Configuration Manual page 49

Chapter 4 Enabling Security Features
Figure 4-9
Obtain the username and password for your RADIUS server account from your system administrator.
Step 2
Note
Step 3 Enter the username in the User Name field.
Note
Note
Step 4 Enter the password in the Password field if the RADIUS server account for the Windows CE device was
set up with a password.
Note
Step 5 Click OK. If the username and password were entered correctly, they are written to volatile memory on
the client adapter. The username and password remain on the client adapter until power is removed from
the adapter, typically due to the client adapter being ejected or the system powering down.
Note
OL-1375-02
Wireless Login Module Screen
The password is optional because not all host accounts on the RADIUS server are set up with
a password.
Usernames and passwords are case sensitive and can contain up to 32 alphanumeric
characters.
If your device is running Windows CE 3.0 version 2002 and your RADIUS server account
specifies a domain, enter the domain name before the username and separate the two with a
forward slash (e.g., domain/username).
For security reasons, the characters entered for the password are displayed as asterisks.
If a username and password are stored in the client adapter's Flash memory from a prior
release, they are erased before the new username and password are written to the adapter's
volatile memory, thereby disabling device-level LEAP.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
Using LEAP
4-13