Overwriting An Existing Static Wep Key - Cisco Aironet 340 Series Installation And Configuration Manual

Chapter 4 Enabling Security Features
Figure 4-5
Select WEP under Property. Select Enabled from the list of options in the Value box to enable static
Step 7
WEP.
Click OK to save your changes and to exit the utility.
Step 8

Overwriting an Existing Static WEP Key

Follow the steps below to overwrite an existing static WEP key.
Step 1 If you entered the password correctly in the Enter Password screen, the CEM screen appears (see
Figure
Figure 4-6
A checkmark appears in the Already Set? box for all existing static WEP keys.
Note
OL-1375-02
ACU Screen
4-6).
CEM Screen
For security reasons, the codes for existing static WEP keys do not appear on the screen.
Also, you can write over existing keys, but you cannot edit or delete them.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
Using Static WEP
4-9