Cisco Aironet 340 Series Installation And Configuration Manual page 64

Viewing Statistics for Your Client Adapter
Table 6-3
Statistic
Packets Retry Short
Packets Max Retries
Up Time (hh:mm:ss)
To view the MIC statistics for your client adapter, click the drop-down arrow in the bottom left corner
Step 3
of the screen and select MIC Stats. The MIC Statistics screen appears (see
Note
Figure 6-4
Table 6-4
Table 6-4
Statistic
Packets MIC OK
Packets No MIC
Packets Incorrect MIC
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
6-6
Transmit Statistics (continued)
The MIC Stats option is available only if your client adapter's driver and firmware support
MIC and MIC is enabled on the access point. See
on page 4-4 for additional information.
MIC Statistics Screen
describes each MIC statistic that is displayed for your client adapter.
MIC Statistics
Description
The number of request-to-send (RTS) packets that were
retransmitted.
The number of packets that failed to be transmitted successfully
after exhausting the maximum number of retries.
The amount of time (in hours:minutes:seconds) since your client
adapter was started. If the client adapter has been running for
more than 24 hours, the time is displayed in days, hours:minutes:
seconds.
"Message Integrity Check (MIC)" section
Description
The number of packets that were received successfully with a
valid MIC.
The number of packets that were discarded due to no MIC being
found.
The number of packets that were discarded due to an incorrect
MIC value.
Chapter 6 Performing Diagnostics
Figure 6-4).
OL-1375-02