Finnleo Euro Outdoor Series Owner's Manual page 4

Receiving Shipment
Upon delivery remove shrink wrapping material and inspect all boxes and
exposed components for damages during shipping. If any damage is
found, you must notify the delivering carrier immediately.
A few minutes with the following instructions will ensure quick and
proper assembly, and many years of enjoyment and relaxation. By
reviewing all the instruction steps ahead of time, you will have a
better feel for the entire process.
Your sauna package will arrive on a stretch-wrapped pallet including a
stack of prebuilt panels, benches, and boxes with the heater and
accessories.
Hardware Package
▪ Bag of 1 1/2" screws
▪ Bag of 3" Screws
▪ Torx Bit
▪ 2 Carriage Bolts w/ Washer and nut.
* Screws are specially coated to not react with cedar or pressure treated wood.
Tools Required
▪ Hammer or brad nailer
▪ Handsaw or miter box (trim molding installation)
▪ Cordless Drill
▪ Tape measure
▪ Square
▪ Level
▪ 3/8" wood bit (if sauna has an L-bench)
▪ Torx bit (provided)
▪ Shims
▪ Phillips screwdriver
▪ Finishing Nails
▪ 100% Silicone caulking
71-0156 Page 4 4215-136
Rev. 03 10/21/2022