Download Print this page

BRAYER BR1251 Instruction Manual page 6

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
6
EN
• Cool down hot products before putting them into the
chopper bowl.
• Watch the amount of products put in the chopper
bowl and the level of poured liquids.
• Cutting edges of the chopping knife and the blender
attachment are sharp and dangerous. Be careful
while using the chopping knife and the blender
attachment.
• If the chopping knife stops during the unit operation,
switch the unit off, unplug it and open the geared
lid, remove the product which is hindering the knife
rotation. If the chopping knife or blender attachment
rotation is hindered, it is recommended to add some
water, juice, liquor etc. into the chopper bowl or the
container used with the blender attachment.
• Remove the motor unit from the chopper bowl only
after disconnecting the motor unit from the mains.
• Do not place the chopper bowl and the measuring
cup into a microwave oven.
• Do not put the attachments and bowls in a
dishwashing machine.
• For children safety reasons do not leave polyethylene
bags used as a packaging unattended.
ATTENTION!
Do not allow children to play with polyethylene bags
or packaging film. Danger of suffocation!
• The unit is not intended for usage by children.
• Do not leave children unattended to prevent using
the unit as a toy.
• Do not allow children to touch the operating surface,
the unit body, the power cord or the power plug
during operation of the unit.
• Be especially careful if children or disabled persons
are near the operating unit.
• During the unit operation and breaks between
operation cycles, place the unit out of reach of
children.
• The unit is not intended for usage by physically,
sensory or mentally disabled persons (including
children) or by persons lacking experience or
knowledge if they are not under supervision of a
person who is responsible for their safety or if they
are not instructed by this person on the usage of the
unit.
• From time to time check the power cord integrity.
• If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or
similar qualified personnel to avoid danger.
• Do not repair the unit by yourself. Do not
disassemble the unit by yourself, if any malfunction
is detected, and after the unit was dropped, unplug it
and apply to the service center.
• To avoid damages, transport the unit in the original
package.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.

Advertisement

loading