BRAYER BR1251 Instruction Manual page 10

10 EN
Before installing the whisk attachment (7), make sure
that the power plug is not inserted into the mains
socket.
• Insert the whisk attachment (7) into the whisk gear (6).
• Insert the whisk gear (6) into the motor unit (2) and
turn it counterclockwise, make sure that the gear (6)
and the whisk (7) are fixed properly (fig. 4).
• Insert the power plug into the mains socket.
• Immerse the whisk attachment (7) into a suitable bowl
with food. You can put the foodstuffs into the cup (11).
• To switch the unit on, press and hold down the button
(4) .
• When you press and hold the button (4) you can
control the attachment rotation speed
• by turning the control knob (5).
• For operation at the maximal rotation speed, press and
hold down the button (3) «TURBO».
• Release the button (3 or 4) to switch off.
• After you finish using the unit, disconnect the power
plug from the mains socket, disconnect the whisk
gear (6) from the motor unit (2) by turning the gear (6)
clockwise.
• Remove the whisk attachment (7) from the gear (6).
POTATO MASH MAKING ATTACHMENT
Continuous operation time with the potato mash
maker attachment (13) should not exceed 1 minute.
Make at least a 3 minute break after 2 operation
cycles.
• Before installing the attachment (13), make sure that
the power plug is not inserted into the mains socket.
• Insert the potato mash maker attachment (13) into
the whisk gear (12) and turn it counterclockwise.
• Insert the gear (12) into the motor unit (2), and turn it
counterclockwise as far as it will go, make sure that
the attachment (13) is fixed properly (pic. 5).
• Immerse the attachment (13) into the bowl with
boiled potatoes.
• To switch the unit on, press and hold down the button
(4).
• When you press and hold the button (4), you can
control the attachment rotation speed by turning the
control knob (5).
• For operation at the maximal rotation speed, press
and hold down the button (3) «TURBO».
• When you make potato mash, add warm milk or
some potato pot liquor.
• After the operation unplug the unit, remove the
attachment (13) by turning it clockwise, remove the
gear (12) by turning it clockwise.
• Wash the lower part of the attachment (13), wipe the
outer part of the attachment (13) body with a damp
cloth. Do not immerse the attachment (13) into water
or other liquids.
CAPPUCСINATORE ATTACHMENT
• Continuous operation time with the cappucсinatore
attachment (14) should not exceed 2 minutes. After 2
operation cycles make at least 3 minutes break.