Table of Contents
Advertisement
AEM Performance Electronics
Phone (8am-5pm M-F PST): 310-484-2322
2205 W 126th Street, Unit A
Fax: 310-484-0152
Hawthorne, CA 90250
sales@aemev.com
tech@aemev.com
Drive Unit Harness Installation
INVERTER
Plug 23 way connector into inverter.
Route encoder branch toward motor end of drive unit.
Route all other branches to most convenient location to make
remaining connections.
PWR/GND
Connect RED to 10A fused power that turns on with VCU
Wake.
Connect BLACK to chassis ground.
Do NOT power the inverter using the power/ground circuits
from an AEMnet cable.
Deutsch DT plug and terminals included in kit.
Page 14 of 23
Advertisement
Table of Contents
