Wiring Installation Diagram
Gauge Connections
The X-Series UEGO gauge is supplied with a Power/IO wiring harness (A) and a UEGO sensor harness (B); the harnesses
are connected to the gauge as shown below. The UEGO sensor harness simply needs to be routed to the UEGO sensor
whereas the Power/IO harness will require further integration into the vehicle.
required to operate the gauge are switched 12V (5A fuse) and ground. Please reference the diagrams and information on
the provided for further detail.
7/12/2017 - DOCUMENT NUMBER: 10-0300
30-0300 X-Series UEGO Gauge
The minimum Power/IO connections
© 2017 AEM Performance Electronics
2