Nexcom EBC 355A User Manual page 51

Chapter 3: BIOS Setup
Network Stack Configuration
This section is used to configure the network stack settings.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main Advanced Boot Security
network Stack [Enabled]
Ipv4 PXE Support [Enabled]
Ipv6 PXE Support [Enabled]
PXE boot wait time 0
Version 2.16.1243. Copyright (C) 2013 American Megatrends, Inc.
Network Stack
Enables or disables UEFI network stack.
Ipv4 PXE Support
Enables or disables IPv4 PXE boot support. If disabled, IPv4 PXE boot option
will not be created.
Ipv6 PXE Support
Enables or disables IPv6 PXE boot support. If disabled, IPv6 PXE boot option
will not be created.
Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.
Save & Exit
Enable/Disable UEFI network
Stack
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
PXE boot wait time
Configures the wait time to press the ESC key to abort the PXE boot.
37
EBC 355A User Manual