Nexcom EBC 355A User Manual page 50

Chapter 3: BIOS Setup
SATA Configuration
This section is used to configure the SATA drives.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main Advanced Boot Security
SATA Configuration
SATA Port [Enabled]
SATA Mode [AHCI Mode]
SATA Speed Support [Gen2]
SATA Port [Enabled]
mSATA [Enabled]
SATA Port
not Present
mSATA
not Present
Version 2.16.1243. Copyright (C) 2013 American Megatrends, Inc.
SATA Port
Enables or disables the SATA port.
SATA Mode
IDE This option configures the Serial ATA drives as Parallel ATA
physical storage device.
AHCI This option configures the Serial ATA drives to use AHCI
(Advanced Host Controller Interface). AHCI allows the storage
driver to enable the advanced Serial ATA features which will
increase storage performance.
Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.
Save & Exit
Enable / Disable Serial ATA
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
SATA Speed Support
Configures the speed of the SATA controller.
SATA Port
Enables or disables the SATA port.
mSATA
Enables or disables the mSATA port.
36
EBC 355A User Manual