Showven SPARKULAR II User Manual page 9

5. Advanced Menu
Options
Set Temperature
Wireless Control
Density
Motor Protect
Tip Over
Standby Switch
Default Parameter
Factory Mode
Mode Selection
LCD Backlight
Auto Clear Delay
Key Sound
*For better performance of SPARKULAR
permission from SHOWVEN
6. Monitor Interface
Show the parameters of motor etc. main part inside machine. If there is any error it will show
on main interface.
Range Default
400-620 580
ON / OFF OFF
0-100 100
ON/OFF OFF
ON/OFF ON
ON/OFF ON
ON/OFF OFF
User
User Mode Mode
ON/OFF ON
0.1-0.9s 0.1s
ON/OFF ON
®
II, please don't change the default value without
®
.
Explanation
®
Setup SPARKULAR heat chamber temperature
Wireless function
Feeding amount
Motor protect function, default setting is OFF
Tilt function switch, when machine slant over 45
degree it will stop working.
When ON, the machine can firing only when
heating up was finished
Parameters reset to default setting
Factory mode is for engineer only. When in
Factory mode machine can't controlled by DMX
console
LCD Backlight ON/OFF
Automatic clear material time setting
Key pad sound ON/OFF switch