Assembling The Scooter - CareCo X-GO ASTRO User Manual

5. Lower the tiller on the front section. Turn
the tiller adjustment knob to loosen then
lower the tiller. Turn the tiller slightly so
seat post.

7.8 ASSEMBLING THE SCOOTER

Use the procedure below to assemble the scooter:
Raise the tiller on the front section.
towards the rear of the scooter and
position. Secure the tiller by turning
the knob towards the front of the
scooter.
2. Connect the front and rear sections
together. Hold the back of the rear
section and lift the front section into
place using the lever. Then release
the rear section and lower the front
section with the lever. Release the
lever and ensure the sections are
securely linked.
2
2
P. 19