Operation; Control Panel; How To Operate Your Scooter - CareCo Zoom Usage And Maintenance Instructions

Zoom Mobility Scooter - MS01033

4. Operation

4.1 Control panel

1. Battery Level Indicator
2. Speed Dial
3. Horn
4. Wigwag Paddle

4.2 How to operate your scooter

Power switch
Turn the key to power ON or OFF
On: Power is turned on
Off: Power is turned off
Speed dial
Press the slowest or fastest setting to determine the
maximum speed of the scooter.
Forward, Reverse, and Braking
• Pull the speed control lever forwards with your right fingers and the vehicle will move forward.
• Pull the speed control lever forwards with your left fingers and the vehicle will move backward.
• The horn will beep when the vehicle is in reverse.
• Release the speed control lever freely while either going forward or reverse, and the electromagnetic brake in
the motor will be activated, and the vehicle will stop.
Horn Button
Press the horn button to sound the horn. Release the button to stop the horn.
How To Set Freewheel Mode
The motor on the scooter can be disengaged to allow the scooter to be pushed.
Drive Mode
•
To put the scooter into "drive" mode, push the freewheel lever up completely.
Freewheel Mode
•
To put the scooter into "freewheel mode", push the freewheel lever down completely and the scooter can be
moved manually.
Please note that this will put the scooter into freewheel mode, so the scooter's motor and brake will be
•
disengaged.
www.careco.co.uk
1
3
4
Slowest Setting
Neutral
Drive
CareCo, Hubert Road, Brentwood, Essex, CM14 4JE
2 4
Fastest Setting
9