Operation Guide; Receive Mode; Receive Enable; Midi Channel - Elation CYBER PAK User Instructions

2. Operation Guide

2.1 Receive Mode

This function allows you to turn on and control the intensity of the fixture with the
use of a DMX controller or MIDI sequencer. On, off and dimming functions can
be performed through this pack. This dimmer has 4 individual DMX address, DMX
fail mode allows you to assign output when DMX signal is interrupted. You may
also set your dimmer pack to function as 1,2,3 or 4 channel dimmer pack.

2.1.1 Receive Enable

DMX
CH:02
MIDI
MODE MENU

2.1.2 MIDI Channel

DMX
CH:02
MIDI
MODE MENU
5
Tap the Mode button until the Receive LED in
the Segment Display lights, indicating Receive
Receive
Stand by
mode is active.
Chase
When the unit is receiving a DMX signal, the
DMX LED will blink in the Segment Display
indicating a DMX signal is present.
When the unit is receiving MIDI signal, the
MIDI LED will blink in the Segment Display
indicating MIDI signal is present.
1. Enter Receive mode, the Segment Display shows
Receive
Stand by
"CH" followed by two numbers(01-16).
Chase